SonicWALL Secure Anti-Virus Router 80 Wireless Getting Started Guide
Page 19
Unable to See the Setup Wizard?
•
If you see the login screen, but not the Configuration Wizard:
•
Configure your Internet browser to allow popups for the SonicWALL
Secure Anti-Virus Router 80 Wireless.
•
Log into the security appliance using “
admin
” as the user name and
“
password
” as the password. After you log in, click the
Wizards
button
on the
System > Status
page.
•
If you do not see the login screen or the Configuration Wizard:
•
Did you correctly enter the SonicWALL Secure Anti-Virus Router 80
Wireless management IP address,
192.168.168.168
, in your Web
browser?
•
Is your computer set to accept DHCP addressing or set to a static IP
address within the 192.168.168.x subnet range? If not, see
Appendix
A: Configuring DHCP IP Addressing
section, on page 27 for
instructions on changing your Local Area Connection settings.
•
Do you have the Ethernet cable connected between your computer
and the LAN (1) port on your SonicWALL Secure Anti-Virus Router 80
Wireless?
•
Do you need to add the SonicWALL Secure Anti-Virus Router 80
Wireless to your list of trusted sites? Use the default IP address
(192.168.168.168) for this purpose.
•
Is the Test
LED on the front panel of your SonicWALL Secure Anti-
Virus Router 80 Wireless lit? If the Test LED stays lit for more than a
few minutes after the initial power on sequence, cycle power to the
SonicWALL Secure Anti-Virus Router 80 Wireless.
