Remove the backing on the shock pad foam
piece. Apply the shock pad to the nose of the
fuselage as shown. (fig. PP)
Step 42
© 2013 SonicDad Enterprises All rights reserved
Peal the backing and apply the nose pad to one
side of the fuselage as shown. Use the location
lines as a guide. Wrap the pad around the nose;
then apply to the other side using the markings
for location. (fig. QQ)
Step 43
If you wish, you can use a permanent black marker
to color the foam on the canopy as shown. (fig. RR)
Step 44
fig. PP
Apply foam shock
pad
Use location lines to apply
pad around nose
fig. QQ
Color foam above
canopy black
fig. RR
Rev:03/15/13
Project #40 Page 15/25
FPG: Sonic Silhouette