PLAYBACK PARAMETERS
In the bottom part of the main window we have some typical parameters for
further adjusting the sound.
On the left there is Volume. (This is very useful when you start adding
effects.)
The FILTER section is turned on with the little switch beside the word
FILTER, and gives you control of:
FREQ
The cutoff frequency of a Low Pass Filter
RES
Resonance of the Low Pass Filter
FEG
Filter depth to the Low Pass Filter
VEL
Velocity depth to the Low Pass Filter Cutoff
HPF
A High Pass Filter (static)
The ENVELOPE SECTION gives you control over the Attack, Decay,
Sustain, and Release of this instrument. If the FEG switch is enabled, you
are editing the Filter Envelope.
Note that if you lengthen the Release of the amplitude envelope you risk a
weird result if the Key Off samples are audible. If you want to make a Clav
sound with a long release, it’s best to turn down the KEY OFF samples,
which you can do on the Options panel.
If you want to set the Release to our preferred time to blend with the KEY
OFF samples, simply Command-Click (Control-click in Windows) on the
Release knob.
The MUTE switch swaps the sample set from our normal Clavinet samples to
the Mute Clavinet samples.
SONICCOUTURE CLAV USER GUIDE
www.soniccouture.com
email :
