Home Theater Installation
(Using Sub Woofer Output)
8
9
Subwoofer Out
Speaker Output
Line Level
Input
Stereo or
Surround Sound
Processor
Amplifier
Any 4 ohm stable amplifier
that provides a minimum
of 100 watts RMS is
sufficient. Amps 150-300
watts at 4 ohms offers the
finest experience.
It is important that the I BEAM is mounted
correctly for safety and performance.
(Please refer to Mounting Guidelines on page 7.)
Installing the Amplifier
Using RCA cables, connect your sub woofer line out to the
amplifier input. Also be sure your amplifier is plugged in and turned on.
Connect to I BEAM
Attach 12 or 14 gauge speaker wire from the speaker output on
your amplifier to the input terminals on the I BEAM.
1
2
1
1
2
