Mounting Guidelines
In many installations the I BEAM can be mounted directly using the 10 built-in through
holes. A universal mount bracket for the I BEAM
,
SIT part number #UMP1496, is
available when direct mounting is not an option.
Home Theater Seat Mounting
The contemporary Home Theater Seat will generally accept a direct attachment of the
I BEAM using the 10 built-in mounting holes. If your seat was not factory equipped
with the I BEAM it is strongly suggest that you contact the manufacturer directly and
obtain their recommendations for vibro-tactile product mounting.
•
Carefully turn the seat upside down. Support it without the possibility of damage
during the installation process. Always use caution when moving Home Theater
Seating as these items can be heavy and somewhat awkward to maneuver. Get
help if necessary.
•
Find a location on the seat bottom that allows solid attachment to wood structural
members. The ideal spot is toward the center and rear of the seat bottom. (If
seat bottom mounting is not used choose a location on the seat frame near the
rear and center.) Check for proper clearance from motors and seat adjustment
mechanisms. Try to allow air space between the I BEAM and floor when mounted.
Never use the I BEAM to support the seat.
•
Drill pilot holes and secure the I BEAM in the desired location using the supplied
screws. Check for free and complete seat motion. Find another location if the
seat motion is impeded or if seat becomes difficult to move normally.
Secure the I BEAM using the screws in all 10 mounting flange holes.
6
7
