A. Digital Source Select Switch
- This two position toggle selects the desired digital input path, (Toslink plastic fibre opti-
cal or RCA - coax connector).
B. Coax Source Indicator
- The LED will light to indicate when the Digital Source Selector Switch (A) has selected the Coax
digit input path.
C. Optical-Toslink Source Indicator LED
- This LED will light to indicate when the Digital Source Selector Switch (A) has
selected the Optical Toslink digital input path.
D. Lock LED
- This LED will light to indicate when the TransDAC is synchronized to the incoming digital data stream.
E. IEC Socket
- The detachable power cord connects here. When the TransDAC is plugged in to a power source, the unit is
on. See Figure I
F. Optical-Toslink Input
- This is the input socket for an S/PDIF Toslink - fiber optical connection to the digital source.
G. Coaxial Input
- This is the input socket for a coaxial - S/PDIF - RCA connection to the digital source. The coaxiaI - S/PDIF
- RCA cables impedance should be 75 ohms.
H. Left and Right Channel RCA Single-Ended Audio Outputs
- These line level outputs are connected to preampli-
fier, integrated amplifier or receiver inputs.
The TransDAC is factory set for the correct operating AC voltage for the area in which it is sold. If a different operating volt-
age is required, please contact an authorized Sonic Frontiers dealer, distributor or the factory directly.
CONTROL FUNCTIONS AND CONNECTIONS
A
D
C
B
E
H
G
F
