sonible d24, Owner'S Manual

Page: 27 / 50

27
d:24 owner‘s manual
Overall amp health
•
amp on: state of the main power switch
•
smps: state of the four main smps
•
analog psu: state of the input buffer psu
•
soft mute: When the global mute was activated by the
touch interface or the remote control, this variable is
set to „on“.
•
panic mute: global mute was activated by either hard-
ware (panic switch) or software (global mute button in
touch interface)
1
2
3
Temperature control
• smps left: temperature of the smps left in °C
• smps right: temperature of the smps right in °C
• amplifiers: temperature of the power amplifiers °C
•
fans smps: speed of the smps fans in percentage of
maximum fan speed
• fan amplifiers: speed of the amplifier fan in percentage
of maximum fan speed
Controller
update / install now
If the amp is connected to the internet, its firmware can be
updated by clicking update
(only active if a new firmware
version is available). After the new firmware has been
downloaded, the button will change its text to install now .
Re-click the button to start the firmware update. After
installation, the control surface reboots.
NOTE
: Never unplug the amplifier during the update
process!
restart
By clicking restart , the control surface can be reinitialized.
Please note, that all audio functions remain active during
initialization.
The system screen shows the status information for the power
supplies and the panic bus as well as temperatures and fan speeds.
The bottom section offers an option to update the firmware and to
restart the control surface (e.g. if an unexpected problem occurs).