23
8. Plug the luster terminal onto the provided lugs.
9. Connect motion sensor and cover cap and lock the connection.
10. Adjust the direction of the motion sensor by turning and tilting the sensor unit.
11. Switch on the mains fuse.
OPERATING
1. Adjust the time settings (TIME). This means how long the lamp is on after activating.
2. Adjust the photosensitivity (LUX). This means how fast the motion sensor reacts.
Motion sensors work by day and night. For daylight use, set LUX to maximum (SUN) for correct
work. If the lamp is more than 60W, the distance between the lamp and sensor should be 60cm at
least. The sensor and its connected lamp will have no signal at the beginning. After a Warm-up of
30sec, the sensor will start working.
USER´S MANUAL
USER´S MANUAL
EN
Summary of Contents for X-IMS030
Page 2: ...2 BETRIEBSANLEITUNG ...
Page 31: ...31 USER S MANUAL EN ...
