15 Storing the current frequency in a specific memory.
15.1 With remote control: sequentially press button and the memory number,
pressing buttons to
16 Storing the current frequency in the next free specific memory
16.1 With remote control: sequentially press buttons and with the
audio on radio.
CALLS
1 General call from initial screen.
1.1 Normal menu: With the call emission key.
1.2 Through the remote control: press key
2 Call to a specific address
2.1 Normal menu CALL shows a screen with the first 4 addresses available, marking
the one selected with *; with the Up/Down keys we change from one to another.
The Accept key shows us the next 4 and with the Call Emission key, we make the
call to the selected address.
2.2 Through the remote control: short press on key , immediately afterwards
pressing keys to to select the address that we want to call and
pressing key again.
SCENARIOS
1 Activation of a local scenario
1.1 Normal menu LOC SCEN.
1.2 Through the remote control: pressing keys and , , or
In sequence
2 Activation of a general scenario
2.1 Normal menu GEN SCEN.
STATE
1 Call receipt activation/deactivation
1.1 Normal menu STATE/CALL REC.
1.2 Through remote control: press key
2. Change surveillance state
2.1 Normal menu STATE/SURVEILLANCE/NOT HERE to remove the surveillance
functions locally
2.2 Normal menu STATE/SURVEILLANCE/ANULLED to remove the surveillance
functions of the whole installation
2.3 Normal menu STATE/SURVEILLANCE/SURV VOL to activate emission
surveillance in agreement with the volume emitted (depending on position of
potentio meters 9 and 11).
2.4 Normal menu STATE/SURVEILLANCE/PER SURV to activate permanent
emission surveillance.
2.5 Normal menu STATE/SURVEILLANCE/RECEIVE to activate receipt surveillance
3 Change alarm state
3.1 STATE/ALARM/INACTIVE to deactivate the alarm
3.2 STATE/ALARM/BUZZER to activate the alarm with
buzzer, the time and minutes will be selected on the following screens, as well as
the alarm buzzer volume and the days of the week when we want it to be active.
3.3 STATE/ALARM/AUDIO to activate the alarm with the
4 Change state of timed off
4.1 STATE/TIMED OFF/INACTIVE to deactivate the timed off
4.2 STATE/TIMED OFF/30 or 60 o 90 MIN to activate the timed off at 30, 60 or 90
minutes.
5 Infrared activation/deactivation
5.1 STATE/INFRARED/INACTIVE to deactivate the infrareds.
5.2 STATE/INFRARED/ACTIVE to activate the infrareds.
CONFIGURATION
1 Radio
1.1 Toggle radio sensitivity between MINIMUM, LOW, HIGH AND MAXIMUM
1.1.1 CONFIG/RADIO/SENSITIV. menu
1.1.2 With the remote control and with the domotic control off, press and hold a
button from (maximum) to (minimum) for a while.
1.2 Toggle radio between MONO and STEREO
1.2.1 CONFIG/RADIO/(STEREO/MONO) menu
1.2.2 With the remote control and with the domotic control off, press BUTTON
and hold for a while
1.3 Search and automatic storage of stations.
1.3.1 CONFIG/RADIO/AUTO SEARCH menu
1.3.2 With the remote control and with the domotic control off, press and hold
button providing that button has not been pressed before.
1.4 Search and manual storage of stations.
1.4.1 CONFIG/RADIO/MAN. SEARCH menu
1.4.2 With the remote control and with the domotic control set on radio, press
button
to find the stations and sequentially press button
and a button from
to
1.5 Delete 1 station memory
1.5.1 CONFIG/RADIO/DELETE MEM/ONLY ONE menu
1.5.2 With the remote control and with the domotic control set on radio, press
button
and hold for a while providing that the button has not
been pressed before.
1.6 Delete all the station memories
1.6.1 CONFIG/RADIO/DELETE MEM/ALL menu
2 Change of automatic response
2.1 Normal menu CONFIG/AUTO RESP/INACTIVE to deactivate it.
2.2 Normal menu CONFIG/AUTO RESP/VOLUME to activate the automatic
response in agreement with the volume emitted (depending on the position of
potentiometers 9 and 11).
2.3 Normal menu CONFIG/AUTO RESP/TIME to activate automatic response.
3 Change of call emission
3.1 Normal menu CONFIG/CALL EMI/INACTIVE to deactivate call emission.
3.2 Normal menu CONFIG/CALL EMI/NO GENERAL to deactivate general call
emission.
3.3 Normal menu CONFIG/CALL EMI/ACTIVE to activate call emission.
4 Change time
4.1 CONFIG/TIME Menu.
5 Change date
5.1 CONFIG/DATE Menu.
6 Change language
6.1 CONFIG/LANGUAGE Menu.
7 Recording local scenarios
7.1 Normal menu CONFIG/LOC SC/SAVE.
8 Change of local scenario programming
8.1 Normal menu CONFIG/LOC SC/PROGRAM/LOCALX/PROGRAM/INACTIVE to
deactivate the local scenario X program
8.2 Normal menu CONFIG/LOCAL SC/PROGRAM/LOCALX7PROGRAM/ACTIVE to
activate the local scenario X program
9 Recording general scenarios
9.1 Normal menu CONFIG/GENERAL SC/SAVE
10 Change of general scenario programming
10.1 Normal menu CONFIG/GEN SCPROGRAM/GEN/X/PROGRAM/INACTIVE to
deactivate the general scenario program X.
10.2 Normal menu CONFIG/GEN SCPROGRAM/GEN/X/PROGRAM/ACTIVE to
activate the general scenario program X; the hour and minutes and days of the
week that we want to be active will be selected on subsequent screens.
11 Return to general factory recorded scenarios
11.1 Normal menu CONFIG/GENERAL SC/FACTORY
12 Recording simulations
12.1 Normal menu CONFIG/SIMULAT/SAVE
13 Change of simulation programming
13.1 Normal menu CONFIG/SIMULAT/PROGRAM/SIMULX/PROGRAM/INACTIVE to
deactivate the simulation program X
13.2 Normal menu CONFIG/SIMULAT/PROGRAM/SIMULX/PROGRAM/ACTIVE to
activate the simulation program X; the hour and minutes and days of the week
that we want to be active will be selected on subsequent screens.
14 Return to factory recorded simulations
14.1 Normal menu CONFIG/SIMULAT/FACTORY
15 Consult address
15.2 Normal menu CONFIG/ADDRESS
16 Change backlight
16.1 CONFIG/BACKLIGHT/ACTIVE menu to change backlight when we are using the
control.
16.2 CONFIG/BACKLIGHT/INACTIVE to change the
backlight when more than 45 seconds have elapsed since the control was used.
17 Consult the version
17.1 CONFIG/VERSION to consult the software version
