DESCRIPTION
Control with 2 stereo channels and FM radio, auxiliary channel, general call and by
areas, automatic reply, surveillance, alarm clock, calendar, auto-off and IR receiver for
IR remote control (optional).
CONNECTION
OPERATION
1- Display. 2- Auxiliary channel input. 3- Infrared receiver, 4- Call emission
button - Volume increase button, 6- Exit button, 7- Accept button, 8- Volume
down button, 9- Call audio level regulation potentiometer, 10- Mono/stereo
switch, 11- Voice control level regulation potentiometer, 12- Microphone
13- Antenna.
Before connecting the device, make sure that the power supply unit of the system is
switched off. Insert the control into the frame and make the connection according to the
following instructions:
NOTE: The wiring of the system must be installed separately from the electricity
mains, according to regulations.
When power is supplied to the control, the time, date and following items are displayed:
TERMINALS:
2 – Input + 16V power supply.
3 – 16V after switch.
4 – Ground.
7 – Paging audio input and output.
15 – Channel 1 input – left.
16 – Channel 1 input – right.
25 – Channel 2 input – left..
26 – Channel 2 input – right.
COM+ – Communications bus.
COM- – Communications bus.
L – Left speaker output.
R – Right speaker output.
- - Speaker ground
4FA039401
DIGITAL CONTROL WITH FM TUNER - 2 CHANNELS PCD1310
Announcements reception enabled
Announcements reception disabled
Surveillance in emission activated – Surveillance in emission disabled, icon non
visible
Surveillance in reception activated – Surveillance in reception disabled, icon non
visible
Surveillance in emission emitting – Surveillance in emission not emitting, icon non
visible
Alarm activated – Alarm deactivated, icon not visible
Timer off activated – Timer off deactivated, icon not visible
Infrareds activated – Infrareds deactivated, icon not visible
CONTROL OFF:
In this initial state, the volume Up (5) / Down (8) buttons have no function, only emission
button (4) is enabled to make a general call.
Switch audio on by pressing and holding Exit (6) button.
Enter menu by pressing and holding Accept (7) button.
CONTROL ON:
With the volume adjustment Up (5) / Down (8) buttons.
Change station by pressing and releasing Exit (6) and Accept (7) buttons.
Switch audio off by pressing and holding Exit (6) button.
Enter menu by pressing and holding Accept (7) button.
ENTER MENU:
Once inside the menu, we will browse using the Up (5), Down (8), Accept (7)
and Exit (6) buttons.
3 Change volume
3.1 Menu: with audio on, Up/Down buttons.
3.2 With remote control: Press buttons
4 Change bass tones between 0 and 100
4.1 Menu: AUDIO/BASS.
4.2 With remote control: press BASS +/-
5 Change trebles tones between 0 and 100
5.1 Menu: AUDIO/TREBLE.
5.2 With remote control: press TREB +/-
6 Jazz, Classical, Pop, Rock Equalization
6.1 Menu AUDIO/EQUALIZATION.
6.2 With remote control: sequentially press button and
7 Superbass activation/deactivation
7.1 Menu: AUDIO/SBASS.
7.2 With remote control: press button.
8 Change balance between LEFT 50-0, CENTRED, RIGHT 0-50
8.1 Menu: AUDIO/BALANCE.
9 Ideal sound – bass, treble, audio volume, call receiving volume, alarm buzzer
volume (factory preset values)
9.1 Menu: AUDIO/IDEAL
9.2 With remote control: press and hold button.
10 Switching on all the installation controls
10.1 Menu: AUDIO/ALL ON
11 Switching off all the installation controls
11.1 Menu: AUDIO/ALL OFF
12 Tuning in the next station
12.1 With remote control: press button
with audio on radio.
13 Tuning in a specific frequency
13.1 With remote control: sequentially press the button, keying in the
frequency
without the decimal sign, from 876 to 1080.
14 Tuning in the frequency saved in a specific memory
14.1 Menu: AUDIO/RADIO/MEM X.
14.2 With the remote control and with the audio on radio, press the memory number
using button to
or pressing buttons
MENU:
AUDIO
1 On/Off
1.1. From the initial screen with the Exit (6) button.
1.2 AUDIO/CHANNEL Menu.
1.3 With remote control: press button
2 Change audio source
2.1 Menu: AUDIO/CHANNEL
2.2. From the initial screen with the Channel (4) button.
2.2 With remote control: with audio on, press buttons.
to toggle between channels 1-2, button to toggle
between radio and channels 1-2, button to toggle between any audio
source and the auxiliary channel.
