KT-160 USER MANUAL
87
After selecting "Time" (button
) the camera switches into time regulation mode "+"
and "" (buttons -
and
) allow the user to set the time "Minutes" option (button
) is used to set minutes, where minutes may be set as described above or move to
seconds settings. After the clock is set (it is displayed during adjustment above the menu
bar) the user may save chosen settings by pressing OK, or exit the adjustment menu by
pressing the trigger button (10).
Similarly, after selecting date setup, the user may set ("+" and "') a year or move to
months settings, then set the month (" + "and"'), or move to day settings, and then save
the settings and exit the menu without saving them by pressing the trigger button (10).--
NOTE: The date is displayed as month / day / year.
3.9.5
Lens selection
"Lens" option allows the user to choose between standard lens (11mm) or additional
telephoto lens 30mm. Additional telephoto lens may be selected only after its installation.
After installing additional lens (30mm) the camera automatically switches into the
corresponding lens mode.
The use of an additional 30mm lens is described in chapter 9.1
NOTE: Attaching/ detaching additional lens should be performed when the camera is
switched off.
3.9.6
External display and selection of video signal type
Choosing "PAL / NTSC" allows the user to switch the display from the LCD screen of the
camera to an external display and to select the type of video signal (PAL or NTSC).
External monitor should be plugged into the camera interface(12) using the supplied
cable.
When you select this option, the user may choose as follows:
After selection the user must confirm the choice by pressing "Yes" or "No" because after
choosing "PAL" or "NTSC" the image is no longer displayed on the screen of the camera
and is displayed only on a connected external display (including menu bars - and buttons'
