background image

Guarantee conditions

     First of all thank you for the purchase and trust 
placed in the team. We hope that the thermostat 
Siesta meets the needs of your installation.

- Before installing the thermostat make sure that 

environmental  conditions  are  suitable, 
temperature,  humidity,  pollution  and 
greenhouse gas emissions, and that any of these 
factors may affect the efficient operation

- The device is an independent control device for 

surface mounting on a universal embedded box, 
and type 2 dry environment pollution.

- For any work, either as installation or repair, the 

regulator must be disconnected from the power 
supply.

-  Electrical  connections  may  only  be  indicated  in 

this manual and on the sticker on the back of the 
cap connections.

- This controller is not a safety device or can be used 

as  such,  is  responsible  incorporate  appropriate 
protection for each type of facility (homologated) 
by the installer.

- Installation, electrical connection, commissioning 

and  maintenance  must  be  performed  only  by 
qualified personnel.

-  If  visualize  possible  defects  that  could  cause 

damage  or  malfunction  in  the  system,  do  not 
connect the appliance.

- Forbidden the total or partial reproduction of this 

document  by  any  means  without  prior  written 
authorization of Sonder Regulación S.A.

- The graphics and information in this manual are 

indicative  only  and  may  include  technical 
inaccuracies or typographical errors.

- Sonder Regulación S.A. reserves the right to make 

changes  to  the  product,  technical  data,  or 
instructions for assembly and use without notice.

This  device  has  3  year  warranty,  it  is  limited  to 

replacement  of  the  defective  part  and  will  be 
delivered  in  the  same  material  reception 
conditions,  packaging,  batteries,  instructions  or 
any other accessory that includes this product will 
not be replaced and not be noted in the packing 
slip.

We decline any responsibility for damage caused 

to the appliance by bad handling, failure to follow 
instructions contained in this manual or technical 
ignorance of the needs of the installation.

For  repairs  under  warranty  must  present  the 

documentation  that  accredits  purchase  of  the 
device within the validity period of this warranty 
and  as  accurate  a  description  as  possible  of  the 
defect  or  anomalous  behavior  of  the  product 
according to the user.

If the repair is out of warranty, it will inform the 

user of the viability and cost of it. The valuation of 
our  technical  department  may  be  an  additional 
cost to the user.

Are out of guarantee:

!

  Devices  with  serial  number  deteriorated, 

deleted or modified.

!

  Devices whose connection or use have not been 

implemented in accordance with the attached 
to the appliance. 

!

  Devices modified without prior agreement with 

the manufacturer.

!

  Devices damaged by blows or liquid or gaseous 

emanations.

!

   Devices with natural wear or improper use of 

equipment.

!

  

The costs resulting from the sending or receipt 

of material. 

!

 The demands for damages on account of loss of 

profits, compensation for use, & consequential 
damages. Provided that these damages are not 
mandatory liability under the law.

Sonder Online Shop        

www.sonder.es    

                           

Technical Information     

www.sonder-regulacion.com

Energy Control

18

Cód.: 7454VØOCT14

Note: Translation is informative, the only legally binding document is the written version of it in Spanish.

UNE-EN 60730-1 + A1:2005 + A12:2004 + A13:2005

UNE-EN 60730-2-1: 1998 + A11:2005

MADE IN

SPAIN

Designed and manufactured by Sonder in Rubi as:

Summary of Contents for Siesta-TA ECO RF





















Reviews: