background image

 

 

Lodestar Hardware 

Manual

 

 

Document Ref: UM-8084-101 

Issue: A– Rev 8 

© Sonardyne International Limited 2013

 

 

 

 

16 

Limitations of 

liability 

The remedies provided herein are the Purchaser’s sole and exclusive remedies. In 

no event shall Sonardyne be liable for any direct, indirect, incidental, punitive, 

special or consequential damages, or damages for loss of profits, revenue, or use 

incurred by the Purchaser or any third party, whether in an action in contract, or 

tort, or otherwise even if advised of the possibility of such damages. The provisions 

of these terms and conditions allocate the risks between Sonardyne and the 

Purchaser. Sonardyne’s pricing reflects this allocation of risk and but for this 

allocation and limitation of liability, Sonardyne would not have agreed to supply the 

products. 

Copyright and 

Disclaimer 

Sonardyne International Limited asserts its ownership of the copyright in this User 

Manual. 

 

All product names referenced in this document are trademarks of their respective 

companies. Use of a term in this document should not be regarded as affecting the 

validity of any trademark or service name. 

 

Sonardyne International Limited reserves the right to modify or make changes to 

the Lodestar AHRS/INS, and the information contained within this document is 

subject to change without notice. Any changes will be notified to the holder of this 

document at the discretion of Sonardyne. 

 

Product 

Support 

For a list of contact details for Sonardyne’s offices and agents, please refer to 

section 8.2 “Sonardyne Offices and Agents” beginning on page 41. 

 

 

Summary of Contents for Lodestar



























































Reviews: