5
Mounting Option 3 - Key Hole Wall Mount
The SB46 M and SB46 L can be mounted directly to the wall surface.
Choose the Soundbar location and locate the studs with a stud
finder. Use a level and the supplied cardboard key hole wall
mount template to mark the locations on the wall where the
screws should be located. Temporarily tape the template up
once it is level and mark the holes with a pencil. Make sure the
template is perfectly aligned with the display location then pre
drill the pilot-hole locations.
The 400mm mounting points
corresponds to the spacing of 16” on center studs.
Mounting Option 4 - Cabinet or
Table Top Installation
SB46 M and SB46 L can be
mounted in a cabinet or placed on
a table top using the included four
rubber feet.
Remove the adhesive backing
and place the rubber feet on the
outer corners on the bottom of the
Soundbar.
When using the Soundbar in a
cabinet make sure the Soundbar
is placed forward near the cabinet
front edge, not in the rear of the
cabinet. This will ensure best
audio quality.
Proceed to Step 3
Place Soundbar face down on a soft surface. Attach the two
supplied key hole wall mounts to the back of the Soundbar
using the supplied
A
screws. You can use any of the mounting
points on the back of the Soundbar.
To hang key hole wall mount use only #10 - #12 pan head
or flat head screws (Not supplied). The screws must be firmly
attached to the studs to support the weight of the Soundbar.
Mate the screw heads into the large round portion of the key
hole and gently slide into place.
NOTE: PUTTING SCREWS DIRECTLY INTO THE DRYWALL WILL
NOT SUPPORT THE WEIGHT OF THE SOUNDBAR!
If attaching directly to drywall, we recommend self drilling
drywall anchors that can easily accommodate the weight of the
Soundbars. Also highly recommended are the Toggler
®
high-
performance heavy duty toggle bolts.
Rubber feet can be added to the left and right rear top and
bottom edges of the Soundbar to rest against the wall.
NOTE: ADJUST GRILLE AND
CONNECT WIRING PRIOR TO
HANGING - SEE STEP 3 & 4.
Proceed to Step 6
400
MM
400
MM
600
MM
300
MM
Sb46 M VeSa S
tandard
a
ttaCHMent
p
ointS
Sb46 l VeSa S
tandard
a
ttaCHMent
p
ointS
r
ubber
F
eet
on
r
ear
C
ornerS
S O N A N C E S O U N D B A R S S B 4 6 M A N D S B 4 6 L
