3
If the spacers are not used the front
surface of the display will be in line
with the front radius of the Soundbar
grille. This is dependent on the display
thickness and installation preference.
Proceed to Step 2
Display Spacers
Included with your Soundbar are two 8mm thick wood display
spacers. The spacers allow the front surface of the display to be
in line with the flat surface on the top edge of the Soundbar.
When using the spacers carefully place the display on top of
the spacers. This will require two people. Be careful not to
scratch the display.
Spacers do not go under the Soundbar.
Mounting Option 2 - Recessed Soundbar Connector
The recessed Soundbar connector will align with displays from
1 7/32” (31.74mm) to 2 3/32” (53mm) deep displays.
Various depths can be accomplished by using
C
or
D
screws
accompanied by
I
washers and
G
nuts. Use the
A
screws to
attached the connector to the display attachment rails.
Proceed to Step 2
A
M
ounting
o
ption
2 - r
eCeSSed
S
oundbar
C
onneCtor
M
ultiple
d
eptH
o
ptionS
u
Sing
n
utS
and
W
aSHerS
V
ariable
d
eptHS
For
V
ariouS
d
iSplay
t
HiCKneSSeS
G
C or D
Display Spacer
I
S O N A N C E S O U N D B A R S S B 4 6 M A N D S B 4 6 L
