7
OMNI-6T ARCHITECTURAL
SPECIFICATIONS
70V/100V/8 Ohm Selectable 6.5” Omni-Directional
Outdoor Loudspeaker
The loudspeaker shall deliver 360 degrees horizontal,
160 degrees vertical coverage and consist of a 6.5”
(165mm) Polypropylene cone, Santoprene rubber
surround Woofer and 4 x 1.25” (32mm) EPDM dome,
Ferrofluid cooled Wide Band Drivers, with a crossover
point of 500Hz. Frequency range shall be 60Hz –
20kHz (-3dB). Total power handling shall be 120 Watts
continuous program power, 60 Watts continuous pink
noise. Nominal sensitivity should be rated at 88dB, and
it should have a rated maximum SPL of 107dB @ 1 meter
(3.3 feet) average, 113dB peak. The unit shall be supplied
with a line-matching transformer suitable for 100 volt
or 70 volt with a side-mounted control allowing user
selectable power taps of 80W, 40W, 20W and (10W
@70V) and an 8 Ohm bypass. The loudspeaker should
be finished in a dark brown color and shall conform to
Mil Spec 810 for humidity, salt spray, temperature and
UV, have IEC 529 and an IP-66 waterproof rating. The
loudspeaker shall be the Sonance Omni-6T. No other
system shall be acceptable unless the above combined
performance specifications are equaled or exceeded.
TECHNICAL ASSISTANCE
AND SERVICE
The Technical Assistance Department at Sonance is
available at (949) 492-7777 to answer any questions
concerning the operation and installation of your
speakers between the hours of 7:00 AM and 5:00 PM
Pacific time, Monday through Friday, except holidays.
In the event your unit should need repair or service, you
may return the unit to your authorized dealer or use the
following guidelines:
PLEASE KEEP ORIGINAL PACKAGING WHEN POSSIBLE.
1. Be prepared to state the model number and / or
serial number, date of purchase, and dealer’s name
and address when calling.
2. Contact Sonance directly at (949) 492-7777
or at www.sonance.com.
YOU MUST HAVE PRIOR
AUTHORIZATION TO RETURN YOUR UNIT.
3. If you are returning the product directly to Sonance,
call us to obtain a return authorization number
(RMA) before shipping.
4. Ship the product via United Parcel Service, Federal
Express, or other package delivery service. Please do
not use the U.S. Postal Service.
5. Include the return authorization number on the
shipping label. Please do not write the RMA number
directly on the carton.
6. Ship to:
Attn: Quality Assurance Department
RMA# (include RMA number here)
Sonance
11016 Mulberry Ave.
Suite B
Fontana, CA 92337
