6
3. The LED goes out to indicate that deleting has fi nished.
Device unlock
The brand code of every Device can be locked, this way, you can not
change the code.
1. Press and hold button SET than press the selected learning device
key: TV, VCR, SAT, DVD, CD/VCD, LD/HIFI/AUX
2. Input the Code: 9-1-1
Use the Device Unlock command to release the lock:
1. Press and hold button SET than press the selected learning device
key: TV, VCR, SAT, DVD, CD/VCD, LD/HIFI/AUX
2. Input the Code: 9-1-2
Reset all command
With this, you can reset the internal setup to the factory setting.
Press button SET and button TV1 togteher then input the code: 9-9-0!
LED will fl ash two times to indicate the internal setup was fi nished.
Battery replacement
If the or the effi cient range reduces, you should change the
batteries. Open the cover of battery-holder. After that set in 4 pcs
AAA, 1,5 Volt batteries according to polarity.
Codes selected earlier are retained in the memory while batteries
are being replaced. Pressing any of the buttons while replacing the
batteries may result in data loss!
Warning
• Do not expose the remote control to direct heat, sunlight, dust,
steam or shock.
• Remove dust regularly using a soft cloth.
• Make sure that no liquid substance is spilt on the keypad.
• Take care of the correct polarity during setting of batteries.
• If you do not use the device for long time, take out the batteries.
• Never try to disassemble the device, take it to professional!
• Please take care of the distance of two devices (max. 4cm)!
Technical data
system: . . . . . pre-programmed and with learning function, infra red
range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 m
power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 x AAA (1,5 V) (not included)
size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 x 28 x 200 mm
Summary of Contents for home URC 11T
Page 43: ......
