29. Do not touch the unit or the power cable with wet hands.
30. The appliance may only be connected to properly grounded 230 V AC/50 Hz electric wall outlets.
31. Unwind the power cable completely.
32. Do not use an extension cord or a distributor to connect the device.
33. Do not lead the power cable under carpets, doormats, etc.
34. The appliance should be located so as to allow easy access and removal of the power plug.
35. The unit is intended for household use. No industrial use is permitted.
36. Due to continuous improvements, the technical data and design may change without any prior notice.
37. The actual instruction manual can be downloaded from www.somogyi.hu website.
38. We do not take the responsibility for printing errors which may occur, and apologize for them.
INSTALLATION
1. Before installation, carefully remove the packaging material, making sure no to scratch the unit or its power cable. In
case of any damage, the unit must not be operated.
2. It is STRICTLY PROHIBITED to install or use the appliance in zones 0 and 1 of premises containing bathtubs or sho
-
wers (see Figure 3.).
3. All circuits in premises containing bathtubs or showers shall be protected with one or more RCDs with a rated triggering
current of up to 30 mA.
4. To ensure proper operation, you have to arrange for the free circulation of hot air. Therefore, pleas, select the location of
the unit on the wall according to Figure 2. It is forbidden to mount the unit directly below a power socket.
5. Mount the two supplied consoles on the back of the product with the 4 small screws.
6. Put the product against the wall and mark the holes, then drill them.
7. Mount the unit on the wall using the enclosed dowels and bolts.
8. The heater coil switch of the unit must be set in “0” (OFF) position.
9. Plug the unit into a standard grounded wall socket. Now the unit is ready for operation.
Do not cover! Covering the unit can cause overheating, fire or electric shock.
Caution: Risk of electric shock!
Do not attempt to disassemble or modify the unit or its accessories. In case any part is damaged, immediately
power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its
service facility or similarly qualified personnel.
FEATURES
Carbon tube heater for heating the atmosphere of indoor premises ● IPX4 protection against splashing water ● adjustable power (600 W / max. 1200 W)
● wall-mountable ● durable metal housing
STRUCTURE (Figure 1.)
1. carbon fiber heating element
2. power control switch
3. output indicator indicator window
OPERATION
The angle of the appliance can be adjusted manually before use.
0. switched off state
1. low heating stage (600 W)
2. high heating stage (1200 W)
HEATING ELEMENT REPLACEMENT
Warning! The heating element should only be replaced by a specialist! Power off the unit by unplugging it from the electric outlet prior
to replacement.
The appliance may not be operated without the protective grille in place.
The heating element operates much like a conventional incandescent light bulb. Burnt out heating elements are not covered
by the warranty as the y are subject to natural wear.
CLEANING, MAINTENANCE
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the
manner of use and degree of contamination.
1. Switch off and power off the unit by unplugging it from the electric outlet before cleaning.
2. Let the appliance to cool (min. 30 minutes).