4
32. Warning! Risk of explosion in case of incorrect battery replacement! It can be replaced only with the same
or a replacement type.
33. Do not expose the batteries to direct heat radiation and sunshine. It is forbidden to open them up, to throw
them into fire or to short-circuit them.
34. Non-rechargeable batteries must not be charged. Risk of explosion!
35. Do not insert an accumulator instead of the battery, because it provides significantly lower voltage and
efficiency.
36. Do not weld or solder directly to the battery.
37. Store unused batteries in their original packaging, away from metal objects.
38. Do not mix batteries which have already been unpacked.
39. In case of any malfunction, immediately power off the unit and seek the assistance of a specialist.
40. Due to continuous improvements the design and specifications may change without any prior notice.
41. The actual instruction manual can be downloaded from www.somogyi.hu website.
42. We don’t take the responsibility for printing errors and apologize if there’s any.
43. The unit is intended for household use. No industrial use is permitted!
CAUTION: RISK OF ELECTRIC SHOCK!
Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged,
immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the
manufacturer, its service facility or similarly qualified personnel.
THE REMOTE CONTROL IS NOT A TOY. KEEP OUT OF REACH OF CHILDREN.
THIS REMOTE CONTROL INCLUDES A BUTTON BATTERY. IT IS FORBIDDEN TO SWALLOW
THE BATTERY, RISK OF CHEMICAL BURN. IN CASE OF INGESTION, IT MAY CAUSE STRONG
INTERNAL BURN WITHIN 2 HOURS AND MAY LEAD TO DEATH. KEEP THE NEW AND USED
BATTERIES OUT OF REACH OF CHILDREN. IF THE COVER OF THE BATTERY COMPARTMENT
CANNOT GET CLOSED SECURELY, DO NOT CONTINUE TO USE THE PRODUCT AND KEEP IT
AWAY FROM CHILDREN. IF YOU THINK THAT A BATTERY HAS BEEN SWALLOWED OR GOT
INTO ANY BODY PARTS, SEEK MEDICAL ATTENTION IMMEDIATELY.
ASSEMBLY, INSTALLATION OF THE DEVICE
1. Remove the packaging carefully taking care not to damage the plastic body with the scissors or knife.
• 2. Put the wheels tightly on their place. • 3. Fill the freezer packs with water, so that at the top 1 cm space
remains empty. The powder inside the freezer packs is dissolved this way. The powder is not edible! Freeze
the freezer packs in a freezer. • 4. Pull the water tank until it stops. Insert max. 3 cool cooler blocks into it, then
fill the tank with distilled or deionized water up to the MAX mark. • 5. Push the water tank back to its place
carefully, and lock it against accidental pull-outs. • 6. Set the unit on a stable and horizontal base, keeping it
away from radiating heat sources and naked flame. • 7. Insert a CR2025 button cell to the remote control. Pay
attention to the correct polarity.
8. Only connect the unit to the mains after this has been done.
CLEANING, REPLACEMENT OF VAPORIZER MAT (LHP 400/T)
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the
manner of use and degree of contamination.
1. Prior to cleaning switch off and power off the unit by unplugging it from the electric outlet!
2. Use a slightly moistened cloth to clean the unit’s exterior. Do not use any aggressive cleaners. Avoid getting
water inside of and on the electric components of the device!
3. Pull out and clean the inside of the water tank.
4. Remove the backside air filter (10) then pull out the vaporizer mat. If mold stains are noticed on the mat,
replace it with a new one (LHP 400/T)!
5. Reinstall the fan!
