Somogyi Elektronic Home LA 5, Instruction Manual

Page: 3 / 10

EN
Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the
Hungarian language.
Modern, table lamp with touch buttons. You can choose between cold white (5000 K) and warm white (2700 K) lighting, moreover by using the two kinds of LEDs together,
natural colour temperature is available.
Brightness is dimmable in 5 stages. The lamp memorizes the settings and will always switch on following the last ones.
The room temperature (°C / °F), the current time (12h/24h), alarm time and date appears on the LCD display with blue backlight, which is built-in to the shaft of the lamp. The shaft of the
lamp is adjustable within 90° angle, while the head part is adjustable to 180°.
Power supply is provided by the included USB adapter.
PARTS OF THE LUMINAIRE
1. base of the lamp • 2. shaft of the lamp • 3. head part of the lamp with LEDs • 4. touch buttons • 5. LCD display • 6. power adaptor socket • 7. power cable • 8. USB power adaptor
INSTALLATION, USE
Put 1 pc CR 2032, 3 V button battery to the battery holder, located in the shaft of the lamp. This battery provides the power supply of the clock. You can provide power supply for the lamp and LCD
backligth with the included USB power adaptor.
FUNCTIONS OF TOUCH BUTTONS
M – 4 pcs warm white LEDs/ 10 pcs cold white LEDs / all LEDs
– lighting on/off switch
+ – increasing brightness
- – decreasing brightness
FUNCTIONS OF THE BUILT IN CLOCK TOUCH BUTTONS
Mode – switch between displaying of current time (TIME) and alarm time (ALARM)
Set
– clock setting: hour/minute/year/month/day
– alarm setting: hour/minute/repeating alarm in minutes/alarm melody
Up – stepping the values up when setting the clock or alarm. When the time is displayed, you can switch between 12h and 24h time display. In case of 12-h time display, AM will indicate the
Z
time before noon and PM after noon. In case of display of alarm time, alarm can be activated with this button. Active alarm function is indicated by Z symbol.
Down – stepping the values down when setting the time or alarm. You can switch between displaying °C or °F when the clock is displayed. Alarm can be activated with this button, when the alarm
Z
time is displayed. Active alarm function is indicated by Z symbol.
ALARM
Z
Activated alarm function (Z symbol is visible) will wake at the set alarm time, with the pre-set melody (8 tones). Alarm will last 1 minute, then so much pause will follow it, what you set as repeated
section of alarm (1-60 minutes). If you push one of the buttons of the clock during the alarm, then it will wake you up again only on the next day at the set alarm time.
CLEANING AND MAINTENANCE
In order to ensure optimum functioning of the luminaire, the unit may require cleaning at least once a month, depending on the manner of use and degree of contamination.
1. Power off the luminaire before cleaning!
2. Use a slightly moistened cloth to clean the outer surface of the luminaire. Do not use any aggressive cleaners. Avoid getting water inside the unit and on the electric components!
WARNINGS
• Make sure, the appliance has not damaged during transport!
• The lamp may only be used in dry, indoor conditions!
• The lamp may only be operated with the supplied power adaptor. The power voltage of the lamp is 5 V , do not differ from it!
• LED light source of the luminaire is not replaceable. At the end of the lamp lifespan the entire luminaire should be destroyed.
• The luminaire is not suitable for looping-in installation.
• Pay attention to the polarity by battery replacement!
• Do not use different kinds of batteries and/or used and new batteries together!
• Do not open, burn and short circuit the batteries!
• It is forbidden to charge the batteries which are not rechargeable! Risk of explosion!
Do not stare into the light of the LED!
In the event that the power cable should become damaged, it should only be replaced with cables obtained from the manufacturer or its service facility.
Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste
equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in
the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste
management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
SPECIFICATION
power supply: . . . . . . . . . . . . . . . . USB power adaptor is included: PRI: 230 V~ / 50 Hz • SEC: 5 V / 1000 mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . battery for the clock: 1 x 3 V (CR2032), included
length of USB cable: . . . . . . . . . . . 150 cm
power:. . . . . . . . . . . . . . . . . . . . . . 5 W
brightness: . . . . . . . . . . . . . . . . . . 400 lm
LEDs: . . . . . . . . . . . . . . . . . . . . . . 4 pcs warm white and 10 pcs cold white SMD LEDs
colour temperature: . . . . . . . . . . . . 2700 K / 5000 K
power factor: . . . . . . . . . . . . . . . . . >0,5
operating temperature:. . . . . . . . . . +10 - +40 °C
weight: . . . . . . . . . . . . . . . . . . . . . 790 g
dimensions:. . . . . . . . . . . . . . . . . . 150 mm x 330 mm x 260 mm
LED table lamp
LA 5