gate Opener FunctiOn
Security solution: when pressing the lock opener button, the lock only opens, if the monitor is operational,
and active at the time. The red (+) / black (-) wire located on the back of the outdoor unit operates the lock.
The electric lock is not included in the package. It needs to be installed according to personal needs, and
the shape of the door/gate. The lock can be opened from the indoor unit. If no outer gate opener circuit
is used, then the desired output of electric lock should not be greater than 12 V / 500 mA! In case of
operating a lock with greater output, an outer transformer and relay has to be used with it.
selecting the tOne
By pressing the TONE SELECT (7.) button, select the tone you wish to use, then press the STREET VIEW/REPLY (3.) button to accept it.
Volume can be adjusted with button (8.).
expandaBility
The separately purchasable outdoor (DPV 25K) and indoor (DPV 25B) units can be used to expand the base system. The following pos-
sibilities are accessible: 1x 1x monitor / 1x 2x monitor / 2x 1x monitor / 2x 2x monitor / 1x camera
+ 3x monitor
Seek the help of a professional, and let him connect the wires according to the wiring diagram.
taKing a picture
When pressing the call button of the outdoor unit a photograph of the visitor is taken. If visited while not at home you can rematch the taken
pictures later. The photographs are given time stamps. The system can store up to 20 photos, after that the oldest one is deleted.
selecting language
Go into the menu by pressing the STREET MONITOR/REPLY (3.) and after that the TIME/DATE (5.) button. By further pressing the TIME/
DATE (5.) button select the desired menu language. With the STREET MONITOR/REPLY (3.) the monitor can be turned off.
tiMe and date setup
Go into the menu by pressing the STREET MONITOR/REPLY (3.) and after that the TIME/DATE (5.) button. Use the PLAY (6.) button to
select the desired function. Accept the selected row with the TIME/DATE (5.) button, then by pressing it again set the blinking data. With the
PLAY (6.) button the next data setup can be accessed. In the menu you can move with button (5.) and (6.) and set the parameters.
Exiting the menu: Select the EXIT row with the PLAY (6.) button, and accept it using the TIME/DATE (5.) button.
VieWing the phOtOs
In standby (turned off) mode, press the STREET MONITOR/REPLY (3.) button, then the PLAY (6.) button to view the last taken picture.
The other pictures can be accessed with the TIME/DATE (5.) button, or you can exit with the STREET MONITOR/REPLY (3.) button. The
number of the picture, and the precise date of when it was taken is shown at the top of the screen.
deleting pictures
In standby (turned off) mode, press the STREET MONITOR/REPLY (3.) button, then with the TIME/DATE (5.) button go into the menu. Use
the PLAY (6.) button to select DELETE ALL, then by pressing the TIME/DATE (5.) button delete all the picture. If the device already stores
20 photos, then the newer ones will overwrite the oldest photos automatically.
trOuBleshOOting
If no sound or display, check if
- the connection is as described
- there is a mains power supply connected
- one of the cable is no damaged
If the dialogue volume is low, or the screen display is low quality, check, if
- a wire with a sufficiently big cross section was being used
- the recommended distances have not been overstepped
cleaning
Before cleaning, depower the device, by unplugging it from the mains! Use a soft, dry cloth. Do not use aggressive
cleaners and liquids!
