Somnox Sleep Robot, User Manual

Page: 7 / 24

Page
6
of
22
Somnox Sleep Robot
User Manual
4 Safety & Specifications
Safety Instructions (warnings)
The safety instructions below should be
adhered to at all times. Please read them
carefully before use, as misuse may cause
damage to the device or other property,
serious injury or even death.
General
Do not insert foreign objects into any opening
on the device, such as the power adapter port
or SD-card slot.
Do not drop, smash, disassemble, open,
crush, bend, deform, puncture, shred,
microwave, incinerate or paint the device or
powered accessories. Exposure of internal
components can cause damage to both
yourself and your surroundings.
WARNING: Use of the device may cause
oversleeping. Please arrange additional
precautions (for example: an alarm).
Read instruction manual.
Sound and Hearing
WARNING: To prevent possible hearing
damage, do not listen at a high volume for
long periods. Listening to sound at high
volumes or for long periods may damage your
hearing.
Fire / Heat
Do not place naked flame sources, such as
lighted candles, cigarettes, cigars, on or near
the product. The device or the battery may
explode when overheated and exposed to an
extreme heat source, such as a fire. Stop using
the device if it begins to overheat.
Do not expose your device to heavy smoke or
fumes as these might contaminate internal
components.
Prolonged heat exposure of the device and its
power adapter comply with applicable surface
temperature standards and limits. However,
even within these limits, sustained contact
with warm surfaces for long periods of time
may cause discomfort or injury. Take special
care if you have a physical condition that
affects your ability to detect heat against the
body.
Water
Do not touch the control panel of the device,
cords, plug, charger, battery, or other internal
components with wet hands. Doing so may
cause an electric shock to you or damage to
the device’s components.
Do not turn on your device if it is wet. Should
it become wet while already switched on,
immediately turn off your device and allow to
dry. Follow the proper drying
recommendations outlined in your manual and
DO NOT accelerate drying with the use of, for
example, an oven, microwave, or (hair)dryer,
because this may damage the device and
could cause a fire or explosion.
Keep the device dry. Precipitation, humidity,
and liquids contain minerals that will corrode
electronic circuits. The device should always
be used in conjunction with a sleeve to
minimize the impact on the device.
Do not use the device if you are incontinent or
if you have any other condition where there is
a chance of wetting the device. This could
cause fire, electric shock, injury, or damage to
the device or other property.