Page 19
Transcend Sleep Apnea Therapy User Manual
Using the Transcend P
4
or P
8
Battery
The Transcend P
4
and P
8
Batteries are optional power sources for Transcend. To use,
connect the P
4
or P
8
battery outlet cable to the Transcend by inserting the barrel
connector into the power jack on the Transcend. Be sure the power-up LED flash
sequence completes indicating that power is being supplied to the Transcend and that it
has successfully entered Standby Mode.
Note
Fully charge the battery before the first use. Follow the battery charging
instructions provided in this User Manual. Do not connect the battery to the
Transcend during initial charge.
Note
Use the battery in-line with the AC power supply when possible. Connecting the
battery in-line with the AC power supply allows the battery to charge during
therapy and provides backup power to provide uninterrupted therapy in the case of
a power outage.
Using the Transcend P
4
or P
8
Battery in conjunction with AC line power
1.
Insert the barrel plug from the Universal AC Power Supply into the battery.
2.
Insert the barrel plug of the battery into the Transcend power jack so that the plug
and cord face upward.
3.
Plug the Universal AC Power Supply plug into AC line power.
4.
The Transcend power-up LED flash sequence should initiate. Once the power-up
LED flash sequence is complete the LED lights will turn off. This sequence indicates
that power is being supplied to the Transcend and that it has successfully entered
Standby Mode.
Summary of Contents for Transcend Sleep Apnea Therapy
Page 1: ...Sleep Apnea Therapy System User Manual...
Page 6: ......
