Seite
6
von
13
receiver (Receiver).
⑦
DC 24V
Connect with a DC 24V power adapter. (Not necessary if
Receiver connects with power adapter)
2.2 Product Appearance of Receiver
Figure 2 Interfaces
No.
Name
Description
①
On
Link
Out
Power
On: Used to show the working status, blinks when in
normal working state, turns off when stop working.
Link: Twisted Pair Link status indicator. It will keep on when
connection is successful.
Out: When connected with device which supports HDCP
and works normally, this LED will keep on. If the device
does not support HDCP, the LED will blink.
Power: Turns red and keep on when power on.
②
ETHERNET
Ethenet ports, when need to work in a local area network, one
of these 4 ports (both the Ethernet ports of Transmitter and
Receiver) should be used for internet access, and the others
can be connected with computers. If they are well connected,
the yellow LED indicators on the corresponding ports will keep
blink and the green ones will keep on when working.
③
HDBT IN
To connect with the HDBT OUT port of Transmitter by using a
single CAT5e cable (90m length in max).
④
HDMI OUT
HDMI output port, connect with an HDMI displaying device.
⑤
IR IN&OUT
IN: Connect with IR receiver, the IR signal received from
this port can only send out in Transmitter.
OUT: Connect with IR Emitter, and the sending IR signal is
received from Transmitter.
