Description
6
DVM-HDBT-EX07-T
No.
Designation
1
LINK LED indicator
Lit green when HDBaseT connecting between TX and RX
2
HDCP LED indicator
Lit green when signal with HDCP
flash when signal without HDCP
off when no source connected
3
Power LED indicator
Lit red when getting power
4
Power port (24 V/1A DC adapter to power the unit)
5
RS232 port (x 4-pin phoenix terminal connector)
6
IR selection switch
Switch to right side (12 V) or left side (5 V) to select IR
7
IR in port (3.5 mm stereo phone-jack, connect to IR receiver cable)
8
IR out port (3.5 mm mono phone-jack, connect to IR emitter cable)
9
HDBT output
RJ45 connector. Connect to HDBaseT input on DVM-HDBT-EX07-R
10
HDMI input LED indicator
Lit if the HDMI input is active
11
HDMI cable lock
Fix the HDMI cable with screw (see page 10)
12
HMDI input port
Connect to HDMI source device, such as DVD, TV box
13
Mode DIP Switch, 2 pin (UP=0, DOWN=1)
00: RS232 pass through
01: Valens firmware upgrade
