Sommer & Maca Industries VFE-4, Manual

Page: 6 / 44

2.) SAFETY RULES
The machine is provided with all devices of protection both mechanical (chain guard, shelters, etc.) and
electrical (sensors, stops, etc.) in order to avoid any contact with moving parts by the operator.
It is absolutely prohibited for anyone to alter or remove any safety devices mentioned above with the
power on!!
Any kind of verification, control, cleaning, maintenance, change or substitution of parts must be done
with the power off and the main disconnect locked out. (see section 9)
The machine is moreover designed in conformity to CE as per the enclosed statement.
The manufacturer declines any and every responsibility for lack of following safety rules and of injury
prevention described below. He moreover declines every responsibility of damages caused by an improper use
of the equipment or changes made without authorization. It is also necessary for personal safety that no one
beside the operator remains in proximity of the equipment when in use.
2.1) General safety rules
When operating electric equipment, it is necessary to adopt the appropriate safety precautions to minimize the
risk of electrical shock or injuries. Before operating the machine, read the manual carefully and memorize the
following safety rules and save this booklet for future reference:
♦
Keep the work area clean and orderly, as unorganized work areas encourage accidents.
♦
Before starting, verify the condition of the machine. Check the standard operation and for broken and or
damaged parts. Replace all broken or damaged parts by a competent and authorized service person.
♦
All repairs performed by unauthorized service personnel will void the warranty and will constitute operating
the equipment in an unsafe manner leading to potential danger.
♦
It is absolutely prohibited to let children, outsiders, untrained, or people in poor health to touch or use this
equipment.
♦
Verify that the electrical power source conforms to the electrical specifications before operating this
machine.
♦
When installing the electrical power source, make sure that the machine is properly grounded.
♦
Check the outlet to be appropriate and compatible with the automatic protection switch in the machine.
♦
The extension cord if used must have a grounded receptacle, plug and cable as per code.
♦
Never stop the machine by disconnecting the power.
♦
Check periodically the condition of the cable and replace it should it become cut or frayed. This work is to
be performed only by qualified personnel.
♦
Do not allow any personnel to come in contact with this cable.
♦
Do not ignore these advices. Such an act will constitute an unsafe use of this equipment and will create a
potential danger.
♦
Personnel authorized by the manufacturer must make repairs.
♦
The manufacturer is available for immediate technical assistance to insure optimum performance and the
maximum production of the machine.