SOMFY Sonesse Ultra 50 DC RS485 Instructions Manual Download Page 8

Page: 8 / 16

Images not contractually binding

2.4.3. Readjusting the end limits

Readjusting the upper end limit

1) Press the

button to bring the motorised

product to the end limit to be readjusted.
2) Press the

and

Down

buttons at the same

time until the motorised product moves up and

down.
3) Press the

Down

buttons to move the

motorised product to the new desired position.

4) To confirm the new end limit, press the

Stop

button until the motorised product moves up and

down.

Readjusting the lower end limit

1) Press the

Down

button to bring the motorised

product to the end limit to be readjusted.
2) Press the

and

Down

buttons at the same

time until the motorised product moves up and

down.
3) Press the

Down

button to move the

motorised product to the new desired position.

4) To confirm the new end limit, press the

Stop

button until the motorised product moves up and

down.

2.4.4. Restoring the original configuration (Factory mode)

Press the

Up, Stop

and

Down

buttons at the same

time ( ≈7s) until the

motorised product moves up

and down once.
The motor is now in Factory mode, and the led

switches ON.

DWN

3. USE AND MAINTENANCE

This motor is maintenance-free

For the safety of goods and people, Somfy motors are equipped with thermal protection

that will trigger the motor stops in the event of overheating.
Repeated activation of this protection can degrade motor performance.
If the motor goes to thermal protection, please check your installation and check that the

motor is rated for the intended use.
A normal installation is not expected to trigger this protection.



Summary of Contents for Sonesse Ultra 50 DC RS485















Search results

Summary of Contents for Sonesse Ultra 50 DC RS485

Reviews:

Related manuals for Sonesse Ultra 50 DC RS485

Brands by name

Popular brands

SOMFY Sonesse Ultra 50 DC RS485, Instructions Manual

Search results

Summary of Contents for Sonesse Ultra 50 DC RS485

Reviews:

Related manuals for Sonesse Ultra 50 DC RS485

Brands by name

Popular brands