3
Copyright © 2011-2016 Somfy Activités SA. All rights reserved
Copyright © 2011-2016 Somfy Activités SA,. All rights reserved
EN
Somfy Activités SA, F-74300 CLUSES as manufacturer hereby declares that the drive covered
by these instructions when marked for input voltage 230V~50Hz and used as intended accord-
ing to these instructions, is in compliance with the essential requirements of the applicable
European Directives and in particular of the Machinery Directive
2006/42/EC
, and the Radio
Directive
2014/53/EU
.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Christian REY, Approval manager, acting on behalf of Activity director, Cluses, 04/2016.
These instructions apply to all Sonesse 40 drive, the different versions of which are available in
the current catalogue.
Field of application
Sonesse 40 drive are designed to drive all types of interior blinds except pantographs.
The installer, who must be a motorisation and home automation professional, must ensure that
the motorised product is installed in accordance with the standards in force in the country in
which it is installed such as EN 13120 relating to interior blinds.
Liability
Please read these instructions carefully before installing and using the drive. In addition to
following the instructions given in this guide, the instructions detailed in the attached
Safety
instructions
document must also be observed.
The drive must be installed by a motorisation and home automation professional, according to
instructions from Somfy and the regulations applicable in the country in which it is commissioned.
It is prohibited to use the drive outside the field of application described above. Such use, and
any failure to comply with the instructions given in this guide and in the attached
Safety instruc-
tions
document, absolves Somfy of any liability and invalidates the warranty.
The installer must inform its customers of the operating and maintenance conditions for the drive
and must provide them with the instructions for use and maintenance, and the attached
Safety
instructions
document, after installing the drive. Any After-Sales Service operation on the drive
must be performed by a motorisation and home automation professional.
If in doubt when installing the drive, or to obtain additional information, contact a Somfy adviser
or go to the website www.somfy.com.
TRANSLATED INSTRUCTIONS
CONTENT
1 Specific safety advice
4
2 Installation
5
3 Commissioning
6
3.1 Programming the RTS transmitter
6
3.2 Checking the rotation direction
6
3.3 Adjusting the end limits
6
3.4 Recording the RTS transmitter
7
3.5 Mode selection: Roller or Tilting mode 7
3.6 Favorite position: MY position
7
4 Use
8
4.1 Up, Down, My: In roller mode
8
4.2 Up, Down, My: In tilting mode
8
5 Sun function
9
5.1 Introduction
9
5.2 Sun disappearing position
10
6 Modifying the settings
11
6.1 End limit re-adjustement UP LIMIT
11
6.2 Favorite position : MY position
11
6.3 Modifying the motor rotation direction 12
6.4 Modifying the wheel rotation direction 12
6.5 Scroll wheel increment setting
12
6.6 Replacement of a lost remote control 13
6.7 Adding/Deleting RTS transmitter
13
6.8 Adding/Deleting RTS sensors
14
6.9 Erase the memory of the motor.
14
7 Troubleshooting
15
8 Technical data
16
9 Environment
16
5064823B Sonesse 40 RTS.indb 3
11/03/2019 13:58
