Sonesse 30 RTS
EN
Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
11
1]
Press and hold the
Up
button to move the
motorised product to the desired up
position. If necessary, adjust the up
position using the
Up
or
Down
buttons.
2] To memorize the up limit
: Press the
My
and
Down
buttons simultaneously and
release once the motorised product
begins to move. The up limit is now
memorized and green LED blinks 5 times.
3]
Press the
My
button when the motorised
product reaches the desired down
position. If necessary, adjust the down
position using the
Up
or
Down
buttons.
4] To memorize the down limit
: Press the
My
and
Up
buttons simultaneously and
release when the motorised product
begins to move and green LED blinks 5
times. The down limit is now memorized.
The motorised product moves up and will
stop at its upper limit.
5] To confirm and complete limit
programming
: Press and hold the
My
button until the motorised product briefly
moves up and down and green LED blinks
5 times. The end limits are now recorded.
1]
2]
3]
5]
4]
2.4.4.Recording “Pairing” the control point
After recording the end limits:
Briefly press the control point
Prog
. button.
→
The motorised product briefly moves up and
down to confirm pairing.
The control point is recorded “paired” to the
motorised product and green LED blinks 5 times.
PROG.
