ADJUSTING THE LIMITS IN USER MODE
Adjusting the
lower limit:
Adjusting the
upper limit:
Step 4:
PRESS & HOLD
the
MY/
STOP
button until the shade jogs,
then r
elease. Check the new limit.
Step 3:
Adjust to a new
limit position using the
UP
or
DOWN
buttons.
Step 2:
PRESS & HOLD
both
UP
and
DOWN
buttons simultaneously
until the shade jogs, then
release.
Step 1:
Move the shade to the
cu
rr
ent limit position you wish to
adjust and let it stop.
RESETTING THE MOTOR TO FACTORY MODE
PRESS & HOLD
the
PROG button on the motor
(shown below)
for approximately 12 seconds during which
the shade will jog 3 separate times.
All programmed
remotes and limit
settings will be erased. Motor is now
reset to
factory mode
. Motor limits
will need to be re-established.
LED blinks alternately in g
r
een and yellow during the adjustment.
1) Move the shad
e awa
y from the end limits.
PRESS & HOLD
the
UP, MY/STOP
and
DOWN
buttons simultaneously, until the shade jogs. The shade will move up and down
automatically in 10 second cycle
s.
2) T
o inc
rease the speed,
PRESS & HOLD
the
UP
button until
the shade j
ogs. Repeat as needed.
Maximum spe
ed is achieved when the shade jogs 3 times
in each direction
when the
UP
button is pressed.
3) To de
c
rease the speed,
PRESS & HOLD
the
DOWN
button
until the sh
ade jogs. Repeat as needed.
Minimum sp
eed is achieved when the shade jogs 3 times
in each direction
when the
DOWN
button is pressed.
4) T
o confirm the new spee
d,
PRESS & HOLD
the
MY/STOP
button until the shade jogs.
www.somfysystems.com
Copyright © Somfy SAS
TIPS AND RECOMMENDATIONS
To delete all
the transmitters programed,
PRESS
and
HOLD
the
PROG
button on the motor
(as shown)
until the shade jogs twice.
All the transmitters are deleted.
TO DELETE:
First send th
e shade to the cu
r
rent “my” position, then
PRESS & HOLD
the
MY/STOP
button for 5 seconds. The shade will jog
to confirm deletion.
SETTING FAVORITE "MY" POSITION
2)
PRESS & HOLD
the
MY/STOP
button until the shade jogs.
The "my" favorite position is set.
3) To set a NEW "
my
" position, repeat steps 1 and 2.
1) Move the shade to the desi
red
position and press
MY/STOP
button to stop the shade.
If the shade is in motion,
first stop it by p
r
essing
MY/STOP
and then
PRESS
MY/STOP
again
to send it to the “my”
favorite position.
While the shade is stationary, a simple
PRESS
of the
MY/STOP
button will move the shade
to the “my” position from any shade position.
USING THE FAVORITE “MY” POSITION
10 Sec.
10 Sec.
ADJUSTING THE SPEED
OR
OR
2x
Programming
Button
3X
OR
Programming
Button
