background image

EN

Sonesse 28 WF RTS

8

Copyright

©

 2020 SOMFY ACTIVITES SA. All rights reserved.

1]

Press and hold the 

Up

 button to move the

motorised  product  to  the  desired  up
position.  If  necessary,  adjust  the  up
position using the 

Up

 or 

Down

 buttons.

2] To memorize the up limit

: Press the 

My

and 

Down

  buttons  simultaneously  and

release  once  the  motorised  product
begins  to  move.  The  up  limit  is  now
memorized and green LED blinks 5 times.

3]

Press the 

My

 button when the motorised

product  reaches  the  desired  down
position.  If  necessary,  adjust  the  down
position using the 

Up

 or 

Down

 buttons.

4] To  memorize  the  down  limit

:  Press  the

My

  and 

Up

  buttons  simultaneously  and

release  when  the  motorised  product
begins  to  move.  The  down  limit  is  now
memorized.  The  motorised  product
moves  up  and  will  stop  at  its  upper  limit
and green LED blinks 5 times.

5] To  confirm  and  complete  limit

programming

:  Press  and  hold  the 

My

button until the motorised product briefly
moves  up  and  down.  The  end  limits  are
now recorded.

1]

2]

3]

5]

4]

2.3.4.Recording “Pairing” the control point

After recording the end limits:
Briefly press the control point 

Prog

. button.

The  motorised  product  briefly  moves  up  and

down to confirm pairing.
The  control  point  is  recorded  “paired”  to  the
motorised product and green LED blinks 5 times.

PROG.

Summary of Contents for Sonesse 28 WF Zigbee

























Reviews: