EN
Sonesse 28 WF RTS
18
Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
Observations
Possible causes
Solutions
RTS is deactivated. LED
doesn't light when any
button of a paired control
point is pressed.
Press the drive
programming button.
Thermal protection of the
drive is on (Red LED blinks
slowly).
Wait for the drive to cool
down (Red LED will stop
blinking when drive is ready
to use).
The motorised product
stops before its end limit.
The drive has detected an
obstacle (solid Red LED).
Move the motorised
product in the other
direction.
3.6.2.Adding/Deleting Somfy control points
NOTICE
Orange LED blinks slowly when adding or
deleting a remote control.
A
A
A
A
B
B
B
3.6.2.1.Using a control point that has been previously programmed to
the motorised product
1]
Press and hold the
Prog
. button (A) on the
programmed control point until the
motorised product briefly moves up and
down.
ð
Green LED blinks 5 times then orange
LED blinks slowly.
2]
Quickly press the
Prog
. button (B) on the
control point to add or delete.
g
Green LED blinks 5 times.
1]
2]
Prog. A
Prog. B
3.6.2.2.Using the Programming button on the drive head
1]
Press and hold the drive head
programming button until the motorised
product briefly moves up and down.
1]
2]
Prog. B
