C
Intermediate position
(WITH A RTS CONTROL ONLY)
With the SOLIRIS receiver RTS and a RTS control, it is possible to set one or two intermediate positions
(IP) : one accessible from the top of the awning and one from the bottom.
The both intermediate positions (IP1 ; IP2) can be reached manually (with a RTS control)
The “top” intermediate position (IP1) can be reached automatically (with the sun detection).
To record these positions, the SOLIRIS receiver RTS has to record the time for the awning to go from its
top to the IP and also the time from its bottom one to the IP.
RECORD THE INTERMEDIATE POSITION FROM THE TOP OF THE AWNING (IP1)
To remove a RTS control from the memory of a RTS receiver, set the SOLIRIS receiver RTS in its programming mode, then press shortly the
prog button of the RTS control you wish to remove.
It is also possible to “wake up” the SOLIRIS receiver RTS with another RTS control (see § C/2), then press shortly the prog button of
the RTS control you wish to remove.
REMOVE A RTS CONTROL FROM THE MEMORY OF THE RECEIVER
(ON AN EXISTING INSTALLATION)
3
To remove the adresses of all the controls from the memory of a SOLIRIS receiver RTS, press the programming button of the SOLIRIS recei-
ver RTS until the LED blinks .
➭
The memory of the receiver is erased.
4
REACH THE INTERMEDIATE POSITIONS
REMOVE ALL THE CONTROLS FROM THE MEMORY OF THE RECEIVER
(RESET OF THE SOLIRIS RECEIVER RTS)
STOP
Set the awning at
its UP limit with
the RTS control.
Push simulta-
neoustly on the
DOWN and IP
button of the
RTS control until
the awning begins
to move (about 3 sec).
Stop the awning
at the intermedia-
te position you
wish with the RTS
control (if neces-
sary, adjust this
position with
▲
and
▼
push
buttons).
Push the IP
button of the
RTS control
during two
seconds.
➭
The SOLIRIS recei-
ver RTS has memorized the 1st
intermediate position.
IP 1
IP1 or IP2
To reach one of
the intermedia-
te positions, set
the awning is at
its UP (for IP1) or DOWN (for IP2)
limit, then press briefly the IP button
of the RTS control.
➭
The awning will move and stop at the dedica-
ted intermediate position.
RECORD THE INTERMEDIATE POSITION FROM THE BOTTOM OF THE AWNING (IP2)
MANUALY
IP1
AUTOMATICALY
When the day-
light intensity
exceed the
threshold set on
the SOLIRIS receiver RTS, the
awning moves up to the top inter-
mediate position.
2s
STOP
Set the awning at
its DOWN limit
with the RTS
control.
Push simulta-
neoustly on the
UP and IP but-
ton of the RTS
control until the
awning begins to
move (about 3 sec).
Stop the awning
at the intermedia-
te position you
wish with the RTS
control (if neces-
sary, adjust this
position with
▲
and
▼
push
buttons).
Push the IP
button of the
RTS control
during two
seconds.
➭
The SOLIRIS recei-
ver RTS has memorized the 2st
intermediate position.
IP 2
2s
DELETE AN INTERMEDIATE POSITION
To delete an intermediate position,
press briefly the IP button of the RTS
control to reach the intermediate
position you wish to delete, then
press continuoustly the IP button of
the control until the led stops blin-
king (approx. 8 sec.).
➭
The concerned IP is deleted.
