Slim io Receiver Plug
EN
27
Copyright
©
2017 SOMFY ACTIVITE SA, Société Anonyme.. All rights reserved.
5.3.3. Modifying the favourite position (my)
1) Place the motorised product in the required new favourite
position (my).
2) Press the "
my
" button on the control button until the motorised
product moves.
The new favourite position (my) has been programmed.
5.3.4. Deleting the favourite position (my)
1) Briefly press the "
my
" button.
The motorised product will start to move and stop in the
favourite position (my).
2) Press the "
my
" button on the control button until the motorised
product moves.
The favourite position (my) has been deleted.
5.4. ADDING/DELETING SOMFY IO CONTROL POINTS AND IO SENSORS
Refer to the corresponding guide.
5.5. REPLACING A LOST OR BROKEN IO-HOMECONTROL® SOMFY CONTROL
POINT
To replace a lost or broken io-homecontrol® control point, consult a home motorisation and
automation professional.
6. TIPS AND RECOMMENDATIONS
6.1. QUESTIONS ON THE SLIM IO RECEIVER PLUG
Observations
Possible causes
Solutions
The motorised
product does not
operate.
The wiring is incorrect.
Check the wiring of the the Slim io
Receiver Plug and modify it
if necessary.
The motor is in heat protection
mode.
Wait until the motor cools down.
The Somfy io control point battery
is low.
Check whether the battery is weak
and replace it if necessary.
The control point is not compatible.
Check for compatibility and replace
the control point if necessary.
The Somfy io control point used
has not been programmed into the
receiver.
Use a programmed control point or
program this control point.
The motorised
product stops too
soon or too late.
The end limits have been incorrectly
set.
Readjust the end limits.
The "my" position is
not working.
The "my" position is deleted.
Program the "my" position.
I can't delete the
"my" position with
my Easy Sun io
control point.
Your control point is too old (Index E
or older).
Delete the "my" position with
another paired control point.
or
my
or
my
Summary of Contents for Screen+Plug
Page 2: ......