EN
Roll Up 28 WF RTS II
10
Copyright
©
2021 SOMFY ACTIVITES SA. All rights reserved.
Observations
Possible causes
Solutions
The control point is not
compatible or not
programmed. LED doesn't
light when any button of
control point is pressed.
Check the compatibility or
pair the control point as
required referring to
Adding/Deleting control
points [
An obstacle hinders the
movement of the
motorised product. The
Red LED lights fixed on.
Remove the obstacle.
Drive position is out of the
end limits. Red LED blinks 2
times intermittently and
continually.
Proceed to section
.
The drive is neither set nor
paired. Orange LED lights
fixed on.
Proceed to section
The thermal protection has
activated. LED blinks red
continuously.
Wait for the drive to cool
down (LED will switch off).
The motorised product
stops too soon.
The end limits are
incorrectly set.
Reset the end limits
referring to
The motorised product has
exceeded recommended
weight limit.
Replace motorised
product.
The drive battery is low and
requires charge. Red LED
blinks 5 times when any
button of a paired control
point is pressed.
Charge the battery.