3
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
CONTENTS
1. Introduction
3
2. Safety
4
2.1. Safety and responsibility
4
2.2. Specific safety advice
4
3. Installation
5
3.1. Motor preparation
5
3.2. Tube preparation
5
3.3. Motor/tube assembly
5
3.4. Mounting the motorized tube
on the brackets
6
4. Wiring
6
5. Commissioning
6
5.1. Programming the RTS transmitter
6
5.2. Checking the rotation direction
7
5.3. Adjusting the end limits
7
5.4. Recording the RTS transmitter
8
5.5. Favorite position: MY position /
Recording MY position.
8
6. Operation
8
6.1. Mode selection: Roller or Tilting
mode
8
6.2. Up, Down, My: In roller mode
9
6.3. Up, Down, My: In tilting mode
9
7. Additional setting
10
7.1. Favorite position: MY position
10
7.2. End limit re-adjustement
10
7.3. Adjusting the tilting speed
11
7.4. Modifying the motor rotation
direction
11
7.5. Modifying the wheel rotation
direction
11
7.6. Adding/Deleting RTS transmitter
12
7.7. Erasing the transmitters from the
memory
12
7.8. Erasing the memory of the motor
12
8. Troubleshooting
13
9. Technical data
13
1. INTROdUCTION
The Roll Up 28 RTS is a motor specially dedicated to interior applications.
The Roll Up 28 RTS can motorize roller blinds, silhouette blinds and roman shades.
The Roll Up 28 RTS is a battery operated motor, powered with lithium primary batteries
or NiMH batteries with solar pack. The motor can also be powered by a power supply.
Warning : The Roll Up 28 RTS is compatible only with the «Sunis Indoor WireFree
TM
RTS» sensor.
Warning : The Roll Up 28 RTS cannot be used with sealed double glazing.
