background image

1

FACTORY MODE

BEFORE YOU BEGIN
Motors are shipped in FACTORY MODE without limit settings and the 

transmitter ID’s.  Power must ONLY be connected to current screen 

being programmed.  All other screens must be disconnected from their 

respective power while programming.

Note - If motor is 120V AC hardwired and cannot be disconnected, 

please contact an electrician prior to calling Somfy customer service

for assistance.

QUICK PROGRAMMING GUIDE FOR

MAESTRIA™ 50 RTS MOTORS

CONNECT TO POWER MODE
With the motor installed in the screen, connect power to the motor (120V AC).

While programming, screens should not be inactive for longer than 2 minutes 
or motor will exit PROGRAMMING MODE.

Side View

50mm motor diameter

INITIATE PROGRAMMING

On the transmitter, press and hold both UP and DOWN 

simultaneously until the screen jogs. 

CHECK THE DIRECTION OF OPERATION

If hand-held transmitter direction is not properly programmed,

Eolis/Soliris RTS sensor will not function in the manner it was 
intended. Damage to the screens and injury may occur as a result.

Check the direction of rotation by pressing

 

UP or DOWN. 

If necessary change the direction of rotation

 

by simply 

pressing and holding the MY

 

button until the screen jogs.

MAESTRIA™ 50 RTS

MOTORIZATION FOR EXTERIOR SCREENS

Reviews: