3
QUICK PROGRAMMING GUIDE FOR
MAESTRIA™ 50 RTS MOTORS
OBSTACLE DETECTION
CHOICE OF THE LEVEL OF DETECTION
This function gives the possibility to adjust the obstacle detection
during the downward movement to deactivate it or adjust the
sensitivity.
1) Starting from the screen in half-way position, press MY and UP briefly
and again
MY and UP for 2 seconds. The screen jogs.
ESD level 0: the obstacle detection is more sensitive. The
screen moves up and down slowly.
ESD level 1: (DEFAULT) - the obstacle detection is reliable
on most zip screens. The screen jogs.
The Factory default is OK for Tall Hem Bar (unless narrow
opening).
For short hem bar units, put the motor in more sensitive
mode (ESD level 0).
ESD level 2: the obstacle detection is deactivated. The
screens moves up and down slowly.
3) Press MY for 2 seconds to validate the setting.
The screen jogs.
2 sec.
2) Within 10 seconds press UP or DOWN to change the level of detection.
(without feedback within 10 seconds the actuator goes back to USER
M
ODE.
Go back to Step 1.)
2 sec.
Slow jog
Slow jog
Short jog
