SOMFY Orea 50 WT Original Instructions Manual Download Page 7

39

Copyright © 2005 - 2014 Somfy SAS. All rights reserved.

EN

Non contractual images

3. OPERATION AND MAINTENANCE

This drive does not require any maintenance operations

3. 1. RAISING AND LOWERING THE AWNING

1) 

Press the "Up" button:

+

 The awning is raised and automatically stops at the 
upper stop.

2) 

Press the "Down" button:

+

 The awning is lowered and automatically stops at the 
lower stop.

3. 2. STOP FUNCTION

3. 2. 1. With a non-locking double push-button switch

The driven product is moving.

 

-

Simultaneously press the "Up" and "Down" buttons on 
the control point: the driven product stops automatically.

3. 2. 2. With a locking double push-button switch

1) 

The driven product is moving upwards.

 

-

Press the "Up" button on the control point: the driven 
product stops automatically.

2) 

The driven product is moving downwards.

 

-

Press the "Down" button on the control point: the 
driven product stops automatically.

1)

2)

1)

2)

4. TIPS AND ADVICE ON OPERATION

Questions about the Orea WT?

Problems

Possible causes

Solutions

The awning does not 
operate.

The overheating protection 
on the drive has been 
activated.

Wait for the drive to cool 
down.

5. TECHNICAL DATA

Power supply

8=[

 50 Hz

Operating temperature

- 20 °C to + 60 °C 

Protection rating

_)??

Electric insulation

}_

Summary of Contents for Orea 50 WT









Reviews: