adjust the Top and Bottom limit
set ‘My’ position
remove programmed ‘My’ position
Press then release UP and
DOWN until the motor jogs
Press and hold UP and DOWN
until motor jogs
To confirm new MY position
press MY until motor jogs
Place the blind in the
DOWN position
Place the blind in the
UP position
Place the blind in the
desired position
Choose a new
down
position
Choose a new
up
position
Place the blind in the MY position
Hold MY for 5 seconds until motor jogs
Press MY to stop blind at new down
position, then press and hold MY
until motor jogs
Press MY to stop blind at new down
position, then press and hold MY
until motor jogs
adjust ‘My’ position
Repeat procedure to a new desired position
1.
2.
or
or
5 sec.
5 sec.
5 sec.
2 sec.
2 sec.
1.
3.
1.
2.
4.
Confirm end limit setting...
Record an RTS transmitter...
2 sec.
Press and hold MY until the
motor jogs
Press and release the programming button on the back of the remote...
motor jogs to confirm limits are locked and setup is complete
*Do not press and hold.
8.
7.
