DECORATOR SOMFY MATIC
OUTDOOR PLUG-IN SYSTEM
TM
Installation and Operation Instructions
The Outdoor Decorator Somfy
Matic (DSM) enables a
retractable awning to provide
shading from the sun and
protection from the wind
automatically and conveniently.
The sun and wind sensors
continually monitor sun intensity
and wind speed, triggering the
control unit to extend or retract
the awning as needed.
The Outdoor DSM features
advanced circuitry that assures
factory preset accuracy and
proven reliability. It aids in
protecting furniture and carpeting
from fading and saves on heating
and air conditioning costs. The
system is comprised of plug-in
components, so installation is
simple and quick.
INSTALLATION PROCEDURES
1. Make sure that the sun sensor is facing the sun and not
shaded by trees or other building structures. It should be
mounted as high as possible, no more than 100 feet from the
Outdoor Decorator Somfy - Matic. The detection angle is up
to 100 degrees wide from the center of the sensor face.
2. The wind sensor should be placed close to the awning or
shading system to make sure the wind speed is measured at
the product. Guard against installing the wind sensor near
an obstruction such as a chimney, gutter or the awning itself.
The wind sensor should not be more than 100 feet from the
Outdoor DSM.
3. Mount the sun and wind sensor junction box in a concealed
location such as under an eave.
4. Connect the motor cable to the 4-conductor receptacle on
the top of the control box. The sensor cable connects to
the 3-conductor receptacle.
5. Plug the power cable into a weather proof receptacle..
SUN
SENSOR
WIND
SENSOR
MOTOR
TO POWER
Left Mount (Shown): Cat. No: 6300980
Right Mount: Cat. No: 6300981
