STOP
IP1
IP2
5s
Set the end-product at
its DOWN limit with the
RTS transmitter
To reach one of the intermediate
positions, set the end-product at
its UP (for IP1) or DOWN (for IP2)
limit, then press the STOP button
briefly on the RTS transmitter.
The end-product will move and stop at
the programmed intermediate position.
To delete an intermediate position, press the
STOP button briefly on the RTS transmitter to reach
the intermediate position you wish to delete, then
press the STOP button for five seconds.
The concerned intermediate position is deleted.
The product will jog briefly to confirm the
intermediate position has been deleted.
Push simultaneously on the
STOP
UP button of the RTS
transmitter and release them when
the end-product begins to move
and
Stop the end-product at the
intermediate position (IP2) you wish
to achieve (if necessary, adjust this
position with UP and DOWN push buttons).
Push the STOP button of the
RTS transmitter for five seconds.
The end-product jogs
briefly UP/DOWN indicating
that the LT RTS CMO motor
has memorized the second
intermediate position (IP2)
2) Record the INTERMEDIATE POSITION (IP2) referenced from the DOWN LIMIT of the end-product
REACH THE INTERMEDIATE POSITIONS
DELETE AN INTERMEDIATE POSITION
The end-product jogs briefly UP/DOWN
indicating that the LT RTS CMO motor is
in a programming state.
The end-product jogs briefly UP/DOWN
indicating that the transmitter has been
memorized or deleted in the LT RTS CMO motor
Activate the LT RTS CMO memory by pressing
the programming button for more than 2 sec. of
the transmitter/channel already recorded in the
motor's memory.
Select the transmitter/channel you wish to
memorize in the LT RTS CMO motor.
Press briefly on the programming button of the
new RTS transmitter you wish to assign or delete.
Repeat this procedure for each additional
transmitter/channel you wish to add or delete.
3) Add or Delete an additional transmitter in the memory of LT RTS CMO motor. The procedure is the same for adding or
deleting an additional transmitter/channel. If the transmitter/channel has not been previously memorized it will be added
instead of deleted.
Transmitter
previously
recorded
New
Transmitter
>2 Seconds
!
!
