5
Copyright © 2016 Somfy SAS. All rights reserved.
EN
Images not contractually binding
2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION
2.4.1. Questions about the JUNIOR RU 30 RTS?
2.3.3. Readjusting the end limits
The end limits can be readjusted in any order.
Readjusting the upper end limit
1) Press the
Up
button to bring the motorised product to the end limit to
be readjusted.
2) Press the
Up
and
Down
buttons at the same time until the motorised
product moves up and down.
3) Press the
Up
or
Down
button to move the motorised product to the
new desired position.
4) To confirm the new end limit, press the
my
button until the motorised
product moves up and down.
Readjusting the lower end limit
1) Press the
Down
button to bring the motorised product to the end limit
to be readjusted.
2) Press the
Up
and
Down
buttons at the same time until the motorised
product moves up and down.
3) Press the
Up
or
Down
button to move the motorised product to the
new desired position.
4) To confirm the new end limit, press the
my
button until the motorised
product moves up and down.
1)
2)
3)
4)
1)
2)
3)
4)
Observations
Possible causes
Solutions
The motorised
product does not
operate.
There may be some radio interferences.
Unplug the motor supply cable and reconnect the battery
tube to the motor.
One or more batteries have been mounted backwards.
Verify that batteries are all mounted in the correct
manner.
Batteries (inside battery tube) are weak.
Check whether the batteries are weak and replace if
necessary.
The control point battery is weak.
Check whether the battery is weak and replace it if
necessary.
The control point is not compatible.
Check for compatibility and replace the control point if
necessary.
The control point used has not been programmed into
the motor.
Use a programmed control point or program this control
point.
