4/30
J4 WT Protect Drive
Full installation guide
Copyright © 2017 SOMFY ACTIVITES SA. All rights reserved.
Non contractual images.
GENERAL SAFETY INSTRUCTIONS
The installation must be protected from all unauthorised use.
Comply with the assembly and operating guides, in particular the safety
instructions supplied by the manufacturer of the device to be used.
To remove the drive power cable, please use the J4 cable removal tool
supplied, ref: 9017811.
The drive, torque and operating time must be adjusted in relation to the
whole installation.
Moving parts of the drive must be protected if operating less than
2.50 m from the ground or other level surface.
Disconnect all connected cables from the power supply before working
on the installation.
SAFETY INSTRUCTIONS FOR WIRING
Cables routed through a metal wall must be protected and insulated
by sleeving or sheathing.
Secure the cables to prevent any contact with moving parts.
If the drive is used outdoors and if the power supply cable is of the
H05-VVF type, run the cable in a UV-resistant duct, e.g. trunking.
Leave the drive power supply cable accessible: it must be easily
replaceable.
Always make a loop in the power cable to prevent water from
entering the drive!
SOMFY ACTIVITES SA, F-74300 CLUSES as manufacturer hereby declares that
the drive covered by these instructions and used as intended according to these
instructions, is in compliance with the essential requirements of the applicable
European Directives and in particular of the Machinery Directive 2006/42/EC
and EMC Directive 2014/30/EU.
The full text of the EU Declaration of Conformity is available at
www.somfy.com/ce. Antoine Crézé, Approval manager, acting on behalf of the
Business Director, Cluses, 06/2017.
