J4 WT Protect Drive
Full installation guide
27/30
[ Click here to return to contents ]
Copyright © 2017 SOMFY ACTIVITES SA. All rights reserved.
Non contractual images.
6. TIPS & RECOMMENDATIONS
6.1. RESETTING THE DRIVE
The current position of the EVB is stored as the lower end limit
position, unless the lower end limit position has been locked by
the manufacturer.
In the event of a problem, the drive can be reset at any time to abort the
current actions.
6.2. RTS AND IO COMPATIBILITY
The
J4 WT Protect
drive can be modified and made compatible with
RTS and io remote controls. To do this, one of the following products
must be added:
Soliris Mod/Var Slim Receiver RTS
EVB Slim Receiver Variation io
Tip: if possible, put the EVB in the lower end limit position before
resetting the drive. If you do this, there will be no need to re-set
the lower end limit.
15 s
5 s
Simultaneously press the Up and Down buttons.
Hold and wait for two back-and-forth movements after
5 seconds
and
15 seconds
.
Ensure that the EVB is at least 30 cm below the mushroom.
