EN
Copyright © 2016 Somfy SAS. All rights reserved.
5
3 ASSEMBLING THE MONITOR
[1].
Unclip the le-hand side of the front panel using a small flat screwdriver.
[2].
Turn the front panel to reveal the thumb-wheels and the selector on the right.
[3].
Gently pull the front panel to the le to remove it completely from the back.
[4].
Insert the electric cables into the cut-out provided for this purpose.
[5].
Fasten the back of the monitor using screws and plugs adapted to the type of wall.
125
4 ELECTRICAL INSTALLATION
The installation of the power supply must comply with the standards in force in the country in which the product is installed,
and must be carried out by qualified personnel.
4.1 Monitor wiring
[1].
Switch the power supply off.
[2].
Disconnect the monitor connectors.
[3].
Implement the wiring corresponding to the installation.
BUS1
GND
GND
BUS2
VA
12M
Removable terminal block 1
BUS1
Bus input
BUS2
GND
Not used
12M
GND
VA
-DOL
GNDA
+DOL
LB
Removable terminal block 2
-DOL
Not used
+DOL
GNDA
Common push button for buzzer
LB
Push button input for buzzer
