SOFTWARE
•
UAI Plus programming is done through the internal web GUI
*Can be accessed only with Google Chrome 59.0.3071 or higher
For complete set up instruction and features of the Somfy Connect™ UAI Plus
reference the Somfy Connect™ UAI Plus Programming Guide
Visit:
https://www.somfypro.com/on-line-catalog/-/e-cat//1870272
HARDWARE
•
Compatible Glydea® ULTRA Motor
•
SDN RS485 Module for Glydea® ULTRA Motors #1870275
•
Somfy Connect™ UAI Plus #1870272 firmware version 02.01.42 or higher
•
CAT-5e or higher patch cable terminated TIA 568B
–
Suitable length to connect Laptop to SDN Bus line
•
Laptop PC with Windows 7 or higher and Google Chrome 59.0.3071 or higher
IV.
SOMFY CONNECT™ UAI PLUS CONFIGURATION
R E Q U I R E M E N T S
Control a RS485 Module for Glydea® ULTRA Motor by it’s Node ID:
1) Using Google Chrome navigate to the UAI Plus internal web GUI. In the Main Menu select
Settings
(
A
).
2) Open the SDN Commissioning page (
B
), go to the
Motors
tab and click the magnifying glass (
C
) to search for
all Motors and RS485 Modules on the bus line; this will list all discovered Motors.
3) Select an individual Motor, and use the directional buttons to move the Motor (
D
).
Control a RS485 Module for Glydea® ULTRA Motor by Group Addresses:
1) In the
Groups
tab create new Groups (
E
), then assign discovered Motors to Groups under
Links
(
F
).
2) Select one of the Groups, and use the directional buttons to move the Motor Group (
G
).
C O N T R O L
BY NODE ID
BY
GROUP
ADDRESS
7 of 8
A
B
C
D
B
E
G
F
