my
Press and
hold UP
or
DOWN Button
my
Press MY (stop)
Button for 2 seconds
my
Press MY (stop)
Button
1.
2.
3.
Press and
hold UP
Button
my
Press &
hold UP
& DOWN
Button
my
my
Press &
hold Either
UP
or
DOWN
Button
my
my
my
1.
2.
3.
1) Press the
UP directional button
on the transmitter. Shade will travel to
the pre-set UP limit.
CT-32RT-12V
CordLift WireFree Programming & Operation Instructions
1) Press the
UP or DOWN
directional button on the previously addressed
transmitter until the shade reaches a desired intermediate position, then
press the
MY (Stop)
button to stop. If necessary adjust the desired
position with a brief press of either the
UP or DOWN button
.
OPTION ONE
Setting an Intermediate Position (IP)
Note: Shade should be stationary prior to activating intermediate position function. If shade is actively moving
(in-motion) MY (Stop) button should be pressed twice. To Delete: Activate shade to (IP) position, then press and
hold the MY (Stop) button for 5 seconds.
3)
Activate the shade intermediate position by pressing the
MY (Stop) button
from ANY shade position.
2)
Press and hold the
MY (Stop)
button on the transmitter until the shade jogs.
Intermediate position is now added to memory
Re-adjusting Upper Limit (UP Shade Position)
OPTION TWO
2) Once shade stops at pre-set up limit, press and hold the
UP and DOWN
buttons
simultaneously on the transmitter until the shade jogs.
3) Press and hold either the
UP or DOWN button
on the transmitter to adjust
shade to new position.
TM
