SOMFY Chronis io, User Manual, Page: 13 / 116

Copyright © 2013 Somfy SAS. All rights reserved.
Chronis io
11
EN
To change mode, move the mode selection cursor:
¹ Manual mode
¹ Automatic mode
¹ Simulated presence mode
7.1. Manual mode
The manual mode of the Chronis io is used to:
¹ send occasional orders to the associated end-product or end-products.
¹ deactivate automatic order programming.
In manual mode the current time is permanently displayed.
7.1.1.
button
- When the favourite position has been programmed and the end-product or end-products are
)@*BB3=>{763¸0B73)) : the end-product or end-products move to the corresponding favourite
positions (my).
- When the end-product or end-products are moving, you can press {763¸08K869@*)@*B@[3+&
7.1.2.
/ buttons
º*9KG73@[31*9@7*V+*=31*773)B*9=69K@*@[3@0B3*-39=»B7*=G1@0*G(89@@*1*9@7*V²)33)31@6*9
"
"):
- In "
MODE STD : 1
":
¹ Brief press or long press: raise, switch on, open / lower, switch off, close.
- In "
MODE DIM : 2
":
¹ Brief press: fully switch on / switch off the lighting or the heating.
¹ Long press (> 0.5 s): increase / reduce the lighting or the heating.
- In "
MODE TILT1 : 3
":
¹ Brief press: tilt the slats of exterior venetian blinds or roller shutters with tiltable slats.
¹ Long press (> 0.5 s): Fully raise / lower exterior venetian blinds or roller shutters with adjustable
slats.
- In "
MODE TILT2 : 4
":
¹ Brief press: raise / lower the interior venetian blinds.
¹ Long press: tilt slats of interior venetian blinds.
7.2. Automatic mode
The automatic mode of the Chronis io is used to:
¹ send occasional orders to the associated end-product or end-products.
¹ automatically control the associated end-product or end-products by means of automatic orders
programmed according to the days of the week.
- Program the automatic orders for each day of the week (see section " Programming the days of
the week ").
7. OPERATION