Arming the alarm in night mode
➔
➔
Press
.
➔
➔
Enter
user code 1
or place
the badge on the reception area:
You will hear
2 long
BEEPs
.
Only the opening detectors and movement detectors are armed by default, unless
other settings have been made.
Disarming the alarm
➔
➔
Press
.
➔
➔
Enter
user code 1
or place
the badge on the reception area:
You will hear
1 long
BEEP
.
Sending an SOS
➔
➔
From a 2-key remote control,
press and hold the
ON
key for 5 seconds, or
➔
➔
From a 5-key remote control,
press and hold the
SOS
key for 5 seconds.
Viewing the information stored in the keypad
➔
➔
The orange LED flashes on the LCD keypad if a fault is
detected and displayed on the screen.
➔
➔
Test each detector by pressing the key on the front.
To turn off the orange LED on the LCD keypad and to clear the fault memory, fully
arm the alarm and then disarm the alarm on this LCD keypad.
If the batteries are low, replace them.
If the radio link lost, contact your installer or replace the batteries.
OR
OR
➔
➔
OR
FR
DE
IT
EN
EL
ES
PT
